System
ControlBase | ControlSurface | ControlFix
Three product families for professional control panel mounting - designed for the environments where the panel needs to be accessible, presentable, and in the right finish.
ControlBase | Desktop Mounting
ControlBase brings the panel to the user. It provides a stable, finished platform for any surface - desk, bench, or table - with the panel live on the network and presented in a finish suited to the environment.
Used in training sessions, system demonstrations, showrooms, boardrooms, reception desks, and anywhere permanent wall installation isn't the right answer.
Design
Each bracket is matched to the geometry of a specific panel - fixing centres, face dimensions, and mounting depth taken from manufacturer-published specifications. The result is a bracket that presents the panel cleanly, with no visible gap, no adapter plate, and no compromise on alignment.
The display angle is fixed at 45 degrees for standard panels, suited to desk-height interaction. The PDTS Touchscreen is available at 30 or 45 degrees. The base incorporates a permanently bonded internal steel ballast plate - keeping the centre of gravity low enough that the bracket stays put under single-handed operation on any worktop surface.
Finishes
Available in two material systems - Gallery and Core - each suited to different environments and performance requirements.
Gallery Finish (GF) - glass fibre reinforced composite with a satin clearcoat. RF transparent, dimensionally stable, architectural-grade surface. Available in Arctic White, Luna Grey, and Obsidian Black.
Core Finish (CF) - carbon fibre reinforced composite with a raw textured surface. Higher structural rigidity, greater abrasion resistance. Available in Anthracite Black.
Full material specifications, thermal performance, and engineering tolerances are detailed on the Materials page.
ControlBase Stage
ControlBase Stage is built for the operator position in touring and production environments - a more rugged treatment than the standard ControlBase range, for panels that get packed up, moved, and set up again.
Stage is Core finish only - carbon fibre reinforced composite with a curved edge geometry engineered for impact resistance, distributing load across the bracket edge rather than concentrating it at a corner. Available in Anthracite Black or Graphite Grey.
Currently designed for the LSC WPX, in landscape and portrait orientation. The WPX is built for wall installation, so the bracket recesses the panel body into the housing to match its original flush profile - only the edge of the bezel frame sits proud of the bracket surface.
Hardware and Connectivity
Integrated brass threads throughout - rated for repeat removal and reinstallation across the product lifecycle. Steel fixing screws supplied. Isolation feet in rubber or TPU providing surface protection and vibration isolation on any worktop material.
The rear of every ControlBase includes two keystone positions - compatible with RJ45 Cat6, RJ11 Cat3, 2.1mm DC socket inserts, and cable passthrough grommets. A material-matched keystone blank and grommet are included as standard. Additional keystone accessories are available by enquiry at studio@730design.au.
ControlSurface | Surface Mounting
ControlSurface is a surface-mount bracket for direct installation onto joinery, stone, or timber. Profile-matched to the control panel, it sits as an extension of the surface rather than a utility back box - suited to architectural interiors where the detail matters.
Design
The bracket presents the panel flush to the mounting surface - designed to integrate into benchtops, reception desks, and custom joinery where a discrete, low-profile mount is required. Fixing is through the bracket base to the surface, with the panel secured via the same manufacturer fixing centres used in wall installation. Surface fixings are not supplied - select fixings appropriate to the surface and installation context.
Available in the same Gallery and Core finish systems as ControlBase.
ControlFix | Wall Mounting & Adapter Plates
ControlFix covers wall mounting and adapter plate solutions for control panels - inserting into a finished wall or retrofitting onto an existing cutout, without requiring a full back box installation.
The current range covers EU square (Type 86) panels, in two formats for two installation contexts. The standard format is a C-profile adapter that inserts from the front face into a 70mm round cutout. No back box. No cavity access. No second pair of hands. A standard 70mm (2-3/4 inch) downlight hole saw does the job. Available in a 5-pack with screws included, and in a dealer pack for trade supply.
For installations using a US-style wallbox rather than a round cutout, ControlFix NA 2-Gang mounts a Dynalite Revolution EU panel to a standard US 2-gang wallbox - a two-part assembly with a structural mounting plate and a flush Gallery finish face plate.
Compatible with Dynalite, KNX, Control4, Rithum, and other panels using the 60.3mm EU square fixing centre standard. The range continues to expand to cover further wall mounting and retrofit applications.
Production
All products are made to order in our Melbourne studio. Each unit is individually inspected before dispatch. Gallery finish variants undergo a 48-hour clearcoat curing window before final inspection and packaging.
Production runs in weekly cycles. For project quantities or time-sensitive requirements, contact us at the stage of specification and we can plan around your programme.
Compatibility
The range includes purpose-designed mounts for Dynalite Antumbra NA, Revolution NA, Antumbra EU, Revolution EU, Revolution Multigang (double and triple gang), PDTS Touchscreen, Pharos TPS5 and TPS8, Pharos XPT5 and XPT8 Express (Expert) Touch, ETC Mosaic M-TS5, Pathway PWTS Perform Touchscreen (5IN), and LSC WPX (ControlBase Stage). Dimensional formats covering common EU square and rectangular panel dimensions are available alongside the Fit products.
If there's a panel or application not currently in the range, contact us at studio@730design.au - the range is expanding and we're open to working through specific requirements.
Get in Touch
For product enquiries, project requirements, or information about the range, contact us at studio@730design.au.
Every project handled personally.